Product Description
The whole machine is composed of a fully intelligent CCD system alignment section, a plugging section with a booster system, and a material retreating section. The left and right shuttle table moves the printed parts in series in the middle. Can meet high viscosity ink/resin plug hole.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: A irTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
CCD alignment lens: 4
Minimum processing size: 350mm×400mm
CCD resolution: 130
Board thickness range: 0.8-4.0mm
CCD resolution: 12um
Printing speed: 30～300 mm/sec adjustable
CCD working range: 300-720mm
Maximum screen frame size: 1200×1100mm
CCD effective field of view: 12*15mm
Minimum screen frame size: 800×800mm
CCD imaging target size: 1-3mm
The smallest plug hole diameter: ≤ 0.20mm
Available types of CCD targets: unlimited
Table top level accuracy: ±0.1mm/m2
CCD imaging accuracy: 0.01mm
Plug hole accuracy: ±0.02mm
CCD imaging depth of field: 0-2mm
Alignment adjustment: digitization, server adjustment
8-point clamping center positioning and CCD automatic positioning
Squeegee pressure uniformity: ≤5kgf
Covering/scraping angle: ±15°
Printing distance: 0～10 mm
Scratch stroke: servo 0～900 mm adjustable
Clearance from the board: 0～10mm
Plug hole pad design: divided into three pieces
Fine adjustment of screen frame: X, Y, θ±5mm
Equipment power: 5.6/ KWH
Product performance
4 CCD alignment systems, automatic alignment function, switch material number within 3-5 minutes
The self-locking function is set mechanically to ensure the stability and balance of the plug hole
Fully intelligent alignment system, no need to adjust alignment by handwheel
High-viscosity ink/resin can be filled with one knife
Supporting pressurization system to maintain pressure balance, kg pressure 8-12kg
Four-column power lifting system, with high mechanical strength, good rigidity and strong stability
Product Description
The whole machine is composed of a fully intelligent CCD system alignment section, a plugging section with a booster system, and a material retreating section. The left and right shuttle table moves the printed parts in series in the middle. Can meet high viscosity ink/resin plug hole.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: A irTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
CCD alignment lens: 4
Minimum processing size: 350mm×400mm
CCD resolution: 130
Board thickness range: 0.8-4.0mm
CCD resolution: 12um
Printing speed: 30～300 mm/sec adjustable
CCD working range: 300-720mm
Maximum screen frame size: 1200×1100mm
CCD effective field of view: 12*15mm
Minimum screen frame size: 800×800mm
CCD imaging target size: 1-3mm
The smallest plug hole diameter: ≤ 0.20mm
Available types of CCD targets: unlimited
Table top level accuracy: ±0.1mm/m2
CCD imaging accuracy: 0.01mm
Plug hole accuracy: ±0.02mm
CCD imaging depth of field: 0-2mm
Alignment adjustment: digitization, server adjustment
8-point clamping center positioning and CCD automatic positioning
Squeegee pressure uniformity: ≤5kgf
Covering/scraping angle: ±15°
Printing distance: 0～10 mm
Scratch stroke: servo 0～900 mm adjustable
Clearance from the board: 0～10mm
Plug hole pad design: divided into three pieces
Fine adjustment of screen frame: X, Y, θ±5mm
Equipment power: 5.6/ KWH
Product performance
4 CCD alignment systems, automatic alignment function, switch material number within 3-5 minutes
The self-locking function is set mechanically to ensure the stability and balance of the plug hole
Fully intelligent alignment system, no need to adjust alignment by handwheel
High-viscosity ink/resin can be filled with one knife
Supporting pressurization system to maintain pressure balance, kg pressure 8-12kg
Four-column power lifting system, with high mechanical strength, good rigidity and strong stability
粵公網(wǎng)安備44000000000000號
