Product Description

The whole machine is composed of double tables, suitable for circuit/solder mask/plug hole ink printing production process, adopts well-known electrical hardware configuration at home and abroad, equipped with advanced design concepts and stable mechanical structure ratios, and is supported by a number of patented technologies Ensure stable and reliable production and operation of products.

Hardware Configuration

PLC: MITSUBISHI

Rail: THK

Cylinder: AirTAC

Communication: MITSUBISHI

Touch screen: weinview

Synchronous belt: MEGADYNE

Bearing: NSK

Ball screw: TBI

Technical Parameter

Maximum processing size: 630 mm×730mm

Printing distance: 0～10 mm

Minimum processing size: 350mm×400mm

Clearance from the board: 0～10mm

Board thickness range: 0.8-4.0mm

Fine adjustment of screen frame: X, Y, θ±5mm

Printing speed: 30～300 mm/sec adjustable

Fixed screen frame: fixed at six points

Maximum screen frame size: 1200×1100mm

Covering/scraping angle: ±15°

Minimum screen frame size: 800×800mm

Scratch stroke: servo 0～900 mm adjustable

Table top level accuracy: ±0.1mm/m2

Equipment power: 3 KWH

Squeegee pressure uniformity: ≤5kgf

Equipment size: 3880×1750×1900 mm

Product Performance

Using servo scraper bottom, frequency can be set and adjusted

The self-locking function is set mechanically to ensure the stability and balance of the plug hole silk screen

Fully intelligent alignment system, no need to adjust alignment by handwheel

Four-column power lifting system, with high mechanical strength, good rigidity and strong stability